I just received your flashlight. What do I need to do before officially using it?
Please try the following steps:
1. Remove the battery protection which is transparent or green at the end of the battery or between the head and battery top.At the same time, use the PDl0ow original charger to charge the MS32 for about 2 hours until the charging indicator turns green.
2.Clean the contact parts like copper rings inside the head where will connect the battery pack, and the copper rings on top of the battery pack.
3. Use one hand to hold the head and the other hand on the flashlight body, make it extra tight not just tight as Imalent flashlights are very powerful, they need tighter to let the high current pass.
4.Unlock the flashlight (MS32 click five times, until you see the unlock sign on the OLED display)
5.Charge the battery pack and check the voltage (Ms32 click three times of the switch, the OLED display will show the battery voltage), if the battery lower than l4v, it will have a problem to turn on the high output levels.